DDI4 – Imaging a 2004 Fujitsu PATA Laptop HDD (No Music)
This video demonstrates the DeepSpar Disk Imager 4 DDI4 imaging a 2004 Fujitsu PATA laptop HDD (No Music) using only default imaging settings. See both the software user interface and its affects on the hard drive as the disk is tested and imaged. The standard process for imaging a hard drive using DDI4 is outlined in the next section.
DEMONSTRATED DATA RECOVERY PROCEDURE
Connected Devices Executed in Software
Head Mapping Executed in Software
Media Test Executed in Software
Head Mapping Executed in Hardware
Media Test Executed in Hardware
Imaging Process Configuration in Software
Imaging Settings in Software
Imaging Pass #1: Fast Primary Pass (Forwards) in Hardware
Imaging Pass #2: Secondary Pass (Backwards) in Hardware
Imaging Results: Map Statistics in Software
IMAGING PASS #1 – DEFAULT SETTINGS
Name: Fast Primary Pass
Scan Direction: Forwards
Reading Mode: UDMA-4
Block Size: 128 Sectors
Read Procedure: 1 Attempt
Timeout/Error: Skip Blocks
Read Timeout: 300ms
Read Timeout Procedure: Hardware Reset
Hardware Reset Pulse Duration: 100ms
Sectors to Read: Unprocessed
Scan Time: 30 minutes
IMAGING PASS #2 – DEFAULT SETTINGS
Name: Secondary Pass
Scan Direction: Backwards
Reading Mode: PIO
Block Size: 1 Sector
Read Procedure: 1 Attempt
Timeout/Error: Skip Blocks
Read Timeout: 1,000ms
Read Timeout Procedure: Hardware Reset
Hardware Reset Pulse Duration: 100ms
Sectors to Read: Unprocessed, Read Timeout, UNC Errors, AMNF Errors
This website, it-sd.com, uses cookies to provide you with the best experience possible. By using this website, you agree to both our TERMS OF USE & PRIVACY POLICY.OkTerms of Use